(800) 566-9190 Contact Us Follow SimuTech Group on LinkedIn Follow SimuTech Group on Facebook SimuTech Group’s YouTube Channel

Butch Vision

1 minute reading time (248 words)

Stress Linearization in ANSYS Workbench compatible with ASME BPVC

Stress Linearization in ANSYS Workbench compatible with ASME BPVCStress linearization is a technique used to decompose a through-thickness elastic stress field into equivalent membrane, bending, and peak stresses for comparison with appropriate allowable limits.

  • Membrane stress is the average stress through the thickness (P/A)
  • Bending stress is the linearly varying stress through the thickness (Mc/I)
  • Peak stress is the total stress minus the membrane plus bending stress

Stress linearization was developed in the pressure vessel industry by Kroenke and Gordon in the 1970s. It was first implemented in Section III (nuclear vessels) and Section VIII, Division 2 (commercial vessels) of the ASME Boiler and Pressure Code. Although widely used in industry thereafter, specific guidance was not included in ASME Boiler & Pressure Vessel Code (BPVC) Section VIII Div. 2 until 2007.

While ANSYS Workbench can be used to validate designs, care must be taken in how the stresses and their locations are handled.

To learn about this topic, view our free, one-hour webinar recording that discusses stress linearization and how to use ANSYS Workbench to model and validate your designs compatible with ASME BPVC.

Note that you cannot use Internet Explorer (IE) browser to view webinar recordings.

Besides the webinar recording, there is a helpful ACT (ANSYS Customization Toolkit) app - Pressure Vessels Automatic Path Creation - available on the ANSYS ACT Store.

Lastly, SimuTech has several engineers who are well-versed in ASME BPVC. If you are having issues in this area, please contact us at (800) 566-9190 or to discuss how we can help.

0
Modeling Mixing Tanks Using ANSYS CFD
Using ANSYS Mechanical to Calculate Fatigue Life
 

Comments 1

Guest - Hafizuddin on Saturday, August 31, 2019 14:11

Thermal harmonic analysis in ansys workbench using apdl command

Thermal harmonic analysis in ansys workbench using apdl command
blog post comment author avatar
Guest
Saturday, October 19, 2019

Captcha Image